| 研究生: |
陳達人 |
|---|---|
| 論文名稱: |
系統可維護度設計理論與實務之研究 無 |
| 指導教授: | 郭崑謨 |
| 學位類別: |
碩士
Master |
| 系所名稱: |
商學院 - 企業管理學系 Department of Business Administration |
| 論文出版年: | 1978 |
| 畢業學年度: | 67 |
| 語文別: | 中文 |
| 論文頁數: | 182 |
| 中文關鍵詞: | 無 |
| 相關次數: | 點閱:180 下載:0 |
| 分享至: |
| 查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
無
自序
目錄
圖表目錄
第一章 導論1
第一節 研究動機與目的2
第二節 研究方法、對象及資料來源5
第三節 觀念性構架6
第四節 本研究內容概述10
第五節 研究限制11
第二章 系統可維護度的觀念13
第一節 可維護度的定義與使用語言13
第二節 可維護度的重要性與目的26
第三節 可維護度的數量化與測定29
第四節 可維護度、可信度與即用度41
第五節 可維護度管理45
第六節 設備與可維護度54
第三章 可維護度設計與維護支援規劃61
第一節 可維護度的分派61
第二節 可維護度的預測70
第三節 整體後勤支援與維護支援規劃74
第四節 維護層面與政策77
第五節 可維護度設計需求的發展80
第四章 可維護度設計的模式89
第一節 可維護度與系統設計89
第二節 可維護度設計的兩個模式96
第三節 可維護度設計的特性因素111
第五章 電子工廠使用之繞線機可維護度設計個案之研究125
第一節 個案說明125
第二節 資料收集與整理142
第三節 分析與檢討147
第六章 結論與建議173
第一節 結論173
第二節 建議175
附錄一:參考文獻177
附錄二:模擬結果182
圖表目錄
圖1-1生產系統與維護4
圖1-2觀念性構架7
圖2-1維護行動關係21
圖2-2校正維護過程22
圖2-3維護系統模式23
圖2-4指數可維護度函數32
圖2-5可維護度、可信度與即用度44
圖2-6故障率對時間的關係56
圖3-1典型維護功能流程組塊圖(最高層面流程)64
圖3-2系統功能層面分解圖(例)69
圖3-3系統停機時間的步驟83
圖3-4可維護度設計需求的發展85
圖4一1系統設計程序90
圖4-2 MTBF與MTTR 95
圖4-3 MTBF與1/MTTR 95
圖4-4故障偵測程序流程圖99
圖5-1繞線機外型圖128
圖5-2繞線機系統功能層面組塊圖129
圖5-3繞線機系統功能層面組塊圖(續)131
圖5-4繞線機系統功能層面組塊圖(續)133
圖5-5繞線機系統功能層面組塊圖(續)135
圖5-6繞線機可維護度改善作業程序140
表5-1平均維護時間的樣本平均數及標準差145
表5-2期望壽命及MTBF值145
表5-3單位人工、工具及設備成本、停機損失及改進可維護度費用146
圖5-6模擬流程圖157
圖5-7模擬流程圖(續)158
圖5-8模擬流程圖(續)159
圖5-9模擬流程圖(續)160
圖5-10模擬流程圖(續)161
圖5-11模擬流程圖(續)162
一、中文部份:
(一)郭崑謨著,現代企業管理學,修正版,民國六十七年三月,華泰書局印行。
(二)郭崑謨著,存貨管理學,民國六十六年十一月,華泰書局印行。
(三)林英峰著,現代生產管理,民國六十七年元月,商略印書館印行。
(四)楊金福編著,生產管理,民國六十五年十二月,前鋒出版社印行。
(五)田長模譯,系統分析,Richard de Neufuille與Joseph H. Stafford原著,民國六十二年一月,大聖書局印行。
(六)楊維槇著,系統分析:管理決策與資料處理,民國六十四年四月,東華書局印行。
(七)畢成才主編,工廠預防保養,第五版,六十三年十月,中國生產力中心印行。
(八)林英峰著,壽命週期成本法,民國六十六年九月,商略印書館印行。
(九)譚德駒著,「電子計算機在擬合度檢定上之應用」,管理通訊第十二卷第四期(126期),民國六十六年八月,國立政治大學企業管理研究所出版。
(十)吳森琪著,汽車壽命週期成本模式之研究,國立政治大學企業管理研究所碩士論文,民國六十六年六月。
二、英文部份:
(1) Barlow, R. E. and Proschan, F., Mathematical Theory of Reliability, John Wiley & Sons, 1965.
(2) Blanchard, B. S., “Cost Effectiveness, System Effectiveness, Integrated Logistic Support, and Maintainability”, IEEE Transactions on Reliability R-16, No. 3, 1967.
(3) Blanchard, B. S., Logistics Engineering and Management, Prentice-Hall Co. 1976.
(4) Blanchard, B. S., et al., Maintainability Principles and Practice, McGraw-Hill Book Co. 1969.
(5) Blanchard, B. S. and Lowery, E. E., Maintainability, McGraw-Hill Book Co.,1969.
(6) Calabro, S. R., Reliability Principles and Practices, Prentice-Hall Co. 1973.
(7) Carson, G. B. ed., Production Handbook, 2nd ed., Ronald Press Co. 1967.
(8) Cleland, D. I. and King, William R., Systems Analysis and Project Management, McGraw-Hill Book Co. 1975.
(9) Elmaghraby, E. E., The Design of Production Systems Reinhold Publishing Co. 1966.
(10) Garrett, L. J. and Silver, M., Production Management Analysis, 2nd ed. 1976.
(11) Gillett, B. E., Introduction to Operation Research: A Computer-Oriented Algorithmic Approach, McGraw-Hill Book Co. 1976.
(12) Goldman, A. S. and Slattery, T. B., Maintainability A Major Element of System Effectiveness, John Wiley & Sons, Inc., 1964.
(13) Ireson, W. C. and Grant, E.L. ed., Handbook of Industrial Engineering and Management, 2nd ed. Prentice-Hall, Inc., 1971.
(14) Haynes, W. W., Massie, J. L. and Wallace, Jr., M. J., Management: Analysis, Concepts, and Cases, Prentice- Hall, Inc., 1976.
(15) Headquarters, U. S. Army Material Command, “Maintainability Engineering Theory and Practice”, Engineering Design Handbook, 1976.
(16) Headquarters, U. S. Army Material Command, “Maintenance Engineering Techniques”, Engineering Design Handbook, 1975.
(17) Hillier, F. S. and Lieberman, G. J. Introduction to Operation Research, 2nd ed., Holden-Day, Inc., 1975 .
(18) Hogg, R. V. and Craig, A. T., Introduction to Mathematical Statistics, 3rd ed., 1970.
(19) Hopeman, K. J., Roduction: Concept, Analysis, control 3rd ed. Charles E. Merrill Publishing Co., 1977.
(20) Hottenstein, M. P., Models and Analysis for Production Management, 1968.
(21) Johnson, R. A., Kast, F. E., and Rosenzivig, S. K., The Theory and Management of Systems, 3rd ed. McGraw-Hill Co., 1973.
(22) Johnson, L. A. and Montgomery, D. C., Operations Research In Production planning, Scheduling, and Inventory Control, John Wiley & Sons, Inc., 1975.
(23) Johnson R. A., Newell, W. T., and Vergin, K. C., Production and Operation Management: A System Concept, Honghton Mifflin Co., 1976.
(24) Juran, J. M. and Gryna, Jr., F. M., Quality Planning and Analysis: From Product Development Through Usage, McGraw-Hill Book Co., 1972.
(25) Kline, M. B. and Lifson, M. W., “Systems Engineering”, Chapter 2 in Cost-effectiveness Economic Evaluation of Engineered Systems, J. M. English, Ed., Wiley, 1968.
(26) Kolasa, B. J., Introduction to Behavioral Science for Business, 1976.
(27) Mayker, B. A. “Maintainability Terminology Supports, The Effectiveness Concept”, IEEE Transactions on Reliability, R-16, No. 1, 1967.
(28) McMillan, C., Gonzales, R. F., and Schriber, T. J., Systems Analysts: A computer Approach to Decision Models, 3rd ed., Richard D. Irwin, Inc., 1976.
(29) Moore, F. G. and Jabonaki, R., Production Control, 3rd ed., McGraw-Hill Book Co., 1977.
(30) Optner, S. I., Systems Analysis for Business Management, 3rd ed., Prentice-Hall, Inc., 1975.
(31) Shannon, R. E., System Simulation: The Art and Science, 1975.
(32) Starr, M. K., Production Management: Systems and Synthesis, 2nd ed., Prentice-Hall, Inc., 1975.
(33) Von Alan, W. H. Ed., Reliability Engineering, Prentice-Hall, Inc., 1964.
(34) Wagner, H. M., Principles of Operations Research: With Applications to Managerial Decisions, Prentice- Hall, Inc., 1975.
(35) Walpole, R. E., Introduction to Statistics, Macmillan Company, 1971.
(限達賢圖書館四樓資訊教室A單機使用)