隨著全球化生產型態的轉變以及區域製造中心的形成，傳統位於單一地點的製造環境早已不符合企業實際的需求，取而代之的是一個全球化的製造環境。而由於全球化的環境容易造成溝通與協調上的不便，因此如何利用資訊科技發展出一個完善的資訊系統來支援製造功能，乃是一件刻不容緩的事情。本研究首先探討全球化製造環境的特性，並依據此特性提出一個符合此環境需求之製造資訊系統的架構，再就此架構建立出一簡單的概念模型。最後，並提出一個以物件導向方法為基礎的系統分析方法，來協助企業管理人員發展出符合其企業特質之製造資訊系統。

Due to the change of production type and the development of

regional manufacturing centers, the traditional and stand-alone manufacturing environment is no longer suitable to the

operations of modern manufacturing enterprise. Instead of it, a global manufacturing environment is to be paid much attention to recently. Since the global environment is easy to make the communication and coordination be inconvenient, how to apply information technology to develop a well-defined information system for supporting manufacturing functions of the enterprise is an important task to be accomplished.In this research, firstly, we try to clarify the properties of a global manufacturing environment, then propose an architecture for the manufacturing information system based on these properties.

Secondly, we intend to establish a model of the global

manufacturing information system based on the architecture that we proposed. Finally, we will develop an object-oriented analysis approach to help the system analysts to build a manufacturing information system for their own-purpose and own-characteristics.

(一)英文部份
1. Adiga, S., Object-oriented Software for Hanufacturing
Systems, Chapman & Hall (1993) .
2. Ad iga, S. and W. T. Lin, “An Object- Oriented Architecture for Knowledge-Based Production Scheduling Systems," Journal of Intelligent Manufacturing, Vo1.4, pp.139-150 (1993) .
3. Askin, R. G. and C. R. Standridge, 1rI0deling And Analysis Of Manufacturing Systems, John Wiley & Sons (1993) .
4. Banerjee, S. and D. Y. Golhar, "EDI Implementation : A
Comparative Study of JIT and Non -JIT Manufacturing Firms,"
International Journal of Physical Distribution & Logistics
Hanament, Vol.23, No.7, pp.22-31 (1993) .
5. Barker, R. M., "Information System Development in a Global Environment," Business Forum, Winter/Spring, pp.57-59
(1993) .
6. Booch, G., Object-Driented Analysis and Design with
application, Second Edition, Benjamin/Cummings (1994) .
7. Booch, G. and J. Rumbaugh, Unified Method : for Object Oriented Development, Version 0.8, Rational Software
Corporation (1994) .
8. Bordoloi, B. and M. H. Lee, "An Object-Oriented View :
Productivity Comparion with Structured Development, "
Information Systems lIanagement, Winter, pp.22- 30 (1994) .
9. Bowles, A., "Get Ready --- Objects Will Move to MIS
Mainstream," Software Magazine, Febrary, pp.99-100 (1995) .
10. Chen, H., "Collaborative Systems: Solving the Vocabulary
Problem," Computer, May, pp.5S-66 (1994) .
11. Collins, C. M. and C. M. Parks, "Manufacturing Information Systems Issues : Software Architectures," Computers and Industrial Engineering, Vol. 21, No.I-4, pp.223-227 (1991).
12. Conger, S., The New Software Engineering, Wadsworth (1994) 13. Cowdrick, R. M., "Distributed CIM Systems - Planning for the Future," Computers and Industrial Engineering, Vol. 21, No.1-4, pp.1-4 (1991) .
14. Davenport, T. H. and J. E. Short, "The New Industrial
Engineering: Information Technology and Business Process
Redesign," Sloan Management Review, Summer, pp.11-27 (1990)
15. Davidson, W. H., "Beyond re-engineering : The three phases of business transformation," IBII Systems Journal, Vol. 32, No.1, pp.65-79 (1993) .
16. Davis, D., "Software Uses Grow with Computing Power Gains, " Manufacturing Systems, July, pp.72-S2 (1994).
17. Davis, G. B. and M. H. Olson, Management Information
Systems:Conceptual Foundations, Structure, and Development,
Second Edition, McGraw Hill (1975) .
IS. Due, R. T., "Object-Oriented Technology: The Economics of a New Paradigm," Information Systems Management, Summer,
pp.69-73 (1993) .
19. Elmasri, R. and S. B. Navathe, Fundamentals of Database
Systems, Benjamin/Cummings (1994).
20. Ettlie, 'J. E., "New Links in the Supply Chain," Productin, February, pp.14-15 (1995) .
21. Everest, G. C. , "Data Base Management: The Next Generation," CIM Review, Fall, pp.31-43 (1990) .
22. Gehling, R. G. and M. L. Gibson, "Using Imaging to
Reengineering Business," Information Systems Management,
Spring, pp.55-60 (1995) .
23. Gessner, R. A., Manufacturing Information System, John Wiley & Sons (1984) .
24. Gopal, C. and G. Cahill, Logistics in Manufacturing,
Business One IRWIN (1992) .
25. Gronbaek, K., M. Kyng and P. Mogensen, "CSCW CHALLENGES:
COOPERATIVE DESIGN IN ENGINEERING PROJECTS," Communications
of the ACM Vol.36, No.4, June, pp.67-77 (1993) .
26. Grudin, J. , "CSCW," Communications of The ACM, Vol. 34, No .12, Dec, pp.31-34 (1991) .
27. Gunasekaran, A. , et. al. , "The design of Computer- Integrated Manufacturing Systems," International Journal of Production Economics, Vo1.34, pp.313-327 (1994) .
28. Gupta, U. G. and J. E. Biegel, "ManIS: Manufacturing
Information Systems," Computers and Industrial Engineering,
Vol.21, No.1-4, pp.235-239 (1991) .
29. Hammer, M., "Reengineering Work: Don't Automate,
Oblitera te," Harvard Business Review, July-August,
pp.104-112 (1990) .
30. Hill, S. , "Gateway to the Enterprise, " Manufacturing Systems, February, pp.25-32 (1995) .
31. IBM Corporation, Business Systems Planning --- Information Systems Planning Cuide, IBM Document #CE20-0527-4 (1984) .
32. Jacobson, I., M. Christerson, P. Jonsson and G. Overgaard, Object-Oriented Software Engineering, revised printing, Addison-Wesley (1995) .
33.Jo1y, D., "OBJECT Methods Tame Reengineering Madness,"
Datamation, May, No.5, pp.43-44,48 (1995) .
34. Kappel, G. and S. Vieweg, "Database Requirements for CIM
Applications," Integrated Manufacturing Systems, Vo1.5,
No.4/5, pp.48-63 (1994) .
35. Kekre, S. and T. Mukhoopadhyay, "Impact of electronic data interchange on quality improvement and inventory reduction programs: Afield study," International Journal of Production Economics, Vo1.28, pp.265-282 (1992) .
36. Kim, C., K. Kim and 1. Choi, "An Object-Oriented Information Modeling Methodology for Manufacturing Information Systems," Computers and Industrial Engineering, Vol. 24, No.3, pp.337-353 (1993) .
37. Klapper, N. D., HI/IJIS : High Impact Manufacturing
Information Systems, Van Nostrand Reinhold (1992) .
38. Klein, M. M., "Reengineering Methodologies and Tools: A
Prescription for Enhancing Success," Information Systems
Management, Spring, pp.30-35 (1994) .
39. Kusiak, A., Intelligent Manufacturing Systems, Prentice
Ha 11 (1990)
40. Law, A. M. and W. D. Kelton, Simulation Modeling and Analysis, Second Edition, McGraw Hill (1990) .
41. Martin, J. and J. J. Odell, Object-Oriented Methods: A
Foundation, Prentice Hall (1995) .
42.Mitchell, F. H., CIM Systems: An Introduction to
Computer-Integrated Manufacturing, Prentice Hall (1991) .
43. Naquin, B. and D. Ali, "Active Database and Its Utilization In The Object Oriented Environment," Computers and Industrial Engineering, Vo1.25, No.1-4, pp.313-316 (1993)
44. Ngwenyama, O. K. and D. A. Grant, "Enterprise Modeling for CIM Information Systems Architectures: An Object-:-Oriented Approach," Computers and Industrial Engineering, Vol.26, No.2, pp.279-293 (1994) .
45.Nof, S. Y., Information and Collaborration Models of
Integration, Kluwer Academic Pubplishers (1993) .
46. Palmer, J., N. Fields, "Computer-Supported Cooperative
Work," Computer, May, pp.15-17 (1994) .
47. Parker, K., "Some Tactical Considerations," Manufacturing Systems, November, pp.2-3 (1994) .
48. Pei, D. and C. Cutone, "Object-Oriented Analysis and
Design:Realism or Impressionism," Information Systems
Management, Winter, pp.54-60 (1995).
49. Porter, M. E. and V. E. Millar, "How information gives you competitive advantage," Harvart Business Review, Ju1yAugust, pp.149-160 (1985) .
50. Rehg, J. A., Computer-Integrated Manufacturing, Prentice
Hall (1994) . .
51. Rembold, U., B. O. Nnaji and A. Storr, Computer Integrated Manufacturing and Engineering, Addison-Wesley (1993) .
52. Rochester, J. B. , "Redefining Computer- Integra ted
Manufacturing," I/S Analyzer, Vo1.30, No.8, pp.1-8 (1992)
53. Rumbaugh, J., M. Blaha, W. Premerlani, F. Eddy, and W.
Lorensen, Object-Oriented Modeling and Design, Prentice
Ha 11 (1 99 1) .
54. Rymer, J. R., "Distributed objects, BPR make a winning pair," Network World, November 7, pp.4l (1994) .
55. Sartori. L. G. , Manufacturing Information Systems,
Addison-Wesley (1988) .
56. Teng, J. T. C., Grover, V. and Fieldler, K. D., "Business Process Reengineering : Charting a Strategic Path for the Information Age," California Management Review, Spring, pp.9-31 (1994) .
57. Thomas, J., "LOGISTICS TRENDS," Distribution, September,
pp.6 (1994) .
58. Udoka, S. J., "Eleectronic Data Interchange(EDI) /
Electronic Graphics interchange and BAR Codes: fundamental
Components of Your World-Class Manufacturing Enterprise,"
Computers and Industrial Engineering, Vol. 25, No.1-4,
pp.139-142 (1993) .
59. Vajpayee, S. K., Principles Of Computer-Integrated
Manufacturing, Prentice Hall (1995) .
60. Vaughan, J., "Supply Chain Focus Enlivens Manufacturing
Processes," Software Magazine, March, pp.96-99 (1995) .
61. Vollmann, T. E., W. L. Berry and D. C. Whhybark,
Manufacturing Planning and Control Systems, IRWIN (1992) .
62. Wang, S., "00 Modeling of Business Process: Object-Oriented Systems Analysis," Information Systems Management, Spring, pp.36-43 (1994) .
63. Wilson, L., "Re-engineering the Workplace: New Foundations," Computerworld, May 1, pp.112-114 (1995) .
64. Wu, B., Manufacturing Systems Design and Analysis, Chapman & Hall (1992) ..
65. Yau, S. S. and J. P. Tsai, "A survey of software design
techniques," IEEE transaction of software engineering,
Vol.SE-12, No.6, pp.713-72l (1986) .
66. Yip, G. S., TOTAL GLOBAL STRATEGY ---Managing for Worldwide Competitive Advantage, Prentice Hall (1995) .
67. Yourdon, E., Modern Structure Analysis, Prentice-Hall,
Yourdon Press (1989)
68. Zhou, M., R. Greenwell and J. Tannock, "Object-oriented
methods for manufacturing information systems," Computer
Integrated Manufacturing Systems, Vol.?, No.2, pp.1l3-121
(1994) .

(二)中文部份
1 . Hammer , M. and J. Champy 原著，楊幼蘭譯，改造企業一再生
策略的藍本，牛頓(1993) .
2. Womack , J. P, D. J. Jones , and D. Roos 原著，李裕昆譯，改
變世界的企業經營體制一一臨界生產方式，中華企管( 1994) .
3. 王立志，「台灣產業對電腦整合製造之需求分析及系統發展之研究」，工業技術研究院委託學術機構研究報告( 1993) .
4. 王立志，林我聰，游錫濱，邱宏昇，與陳建光，「製造資訊系統個體導向系統分析方法」，工業工程學刊， Vol.11 , No.3 , pp.137一146 (1994) .
5. 古新賢，「運用物件導向塑模方法的電腦整合製造系統模式」，台灣工業技術學院管理技術研究所，碩士論文( 1994) .
6 .江立立，「軟體工程的歷史與軟體危機」，資訊與電腦，九月，pp.78-82 (1993) .
7. 江立立，「個體導向系統發展技術漫談」，資訊與電腦，九月，pp.120-124 (1993) .
8. 李淑英，「電腦整合製造資訊流程的探討」，政治大學資訊管理研究所，碩士論文(1994) .
9. 李慶耀，「發展製造系統離散事件模擬之C++類別庫」，交通大學工業工程研究所，碩士論文( 1993) .
10. 林我聰，智慧型現場排程系統之研究，資訊與電腦出版社 (1995) .
1 1.林英峰，全球化作業管理，生產管理課程講義 (1995) .
12. 林錦昌，「製造規劃與控制系統資訊需求分析方法論選擇之參考模式的建立」，東海大學工業工程研究所，碩士論文 (1992) .
13. 吳怡靜，「未來競爭十大方向:譯自『IMD 1994全球競爭力報告』」，
天下雜誌， 10 月(1994) .
14. 施保旭，個體導向技術導引，資訊與電腦出版社(1994) .
15. 黃炳錫，「企業採用EDI 系統及使用效益之研究一一以報關行為例」，淡江大學資訊管理研究所，碩士論文(1994) .
16. 雷邵辰，電腦整合製造(CIM) 一一CAD/CAM應用，松崗(1991) .
17. 葉子禎，「製造計畫與管制系統之資訊流程相關性探討」，東海大學工業工程研究所，碩士論文(1991) .
18. 陳建光，「製造資訊系統之整合性個體導向系統分析方法」，東海大學工業工程研究所，碩士論文( 1993) .
19. 賴士葆，生產/作業管理一一理論與實務，華泰( 1994) .
20. 戴建耘，「個體導向語言的基本特性與使用」，資訊與電腦，二月， pp.103-107 (1994) .